Telit Wireless Solutions LE910C series - Configuring the WE866 Cx Module; Selecting the COM Port

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 33 of 1904 2022-03-04
Not Subject to NDA
Parameter: <err> - error code can be either numeric or detailed (see +CMEE). The
possible values of <err> are reported in the table:
Note: “Numeric Format” Not all modules support the error codes
shown in the table
Note: “Verbose Format” There could be small variations in the
message depending on the module in use
Numeric Format
Verbose Format
0
phone failure
1
no connection to phone
2
phone adaptor link reserved
3
operation not allowed
4
operation not supported
5
PH-SIM PIN required
6
PH-FSIM PIN required
7
PH-FSIM PUK required
10
SIM not inserted
11
SIM PIN required
12
SIM PUK required
13
SIM failure
14
SIM busy
15
SIM wrong
16
incorrect password
17
SIM PIN2 required
18
SIM PUK2 required
20
memory full