Telit Wireless Solutions LE910C series - Page 332

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 332 of 1904 2022-03-04
Not Subject to NDA
the dial string according to ATS8
duration.
ATD><str>[;]
If ";" character is present, a voice call is performed using the
phone number identified by an alphanumeric field. All available
memories are scanned to find out the field.
Name
Type
Default
Description
<str>
string
-
is an alphanumeric field identifying the
phone number. The characters must be
enclosed in quotation marks. The
parameter is case sensitive. Use +CSCS
command to select the character set.
ATD><mem><n>[;]
If ";" character is present, a voice call is performed using the
phone number stored in the selected phonebook memory storage
and in the selected entry location. Use +CPBS=? command to get
all the available memories.
Name
Type
Default
Description
<mem>
string
N/A
identifies the phonebook memory
storage
Values:
SM
:
SIM/UICC phonebook
FD
:
SIM/USIM fixed dialing phonebook
LD
:
SIM/UICC last dialing phonebook
MC
:
Missed calls list
RC
:
Received calls list