Telit Wireless Solutions LE910C series - Page 343

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 343 of 1904 2022-03-04
Not Subject to NDA
<topRx>
integer
0
top value for <wRx> that user is going
to request during the next established
nontransparent HSCSD call
Value:
0
:
0 indicates that user is not going to change
<wAiur>/<wRx> during the next call. This parameter
is not applicable to UTRAN or E-UTRAN UEs.
<codings>
integer
0
a sum of integers each representing a
channel coding that is accepted for
non-transparent HSCSD calls.
Value:
0
:
0 indicates that all supported codings are accepted
(refer +CHSD command for other values). This
parameter is not applicable to UTRAN or E-UTRAN
UEs.
AT+CHSN?
+CHSN: <wAiur>,<wRx>,<topRx>,<codings>
AT+CHSN=?
+CHSN: (list of supported <wAiur>s), (list of supported <wRx>s),(list of
supported <topRx>,(list of supported <codings>s)