Telit Wireless Solutions LE910C series - Page 358

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 358 of 1904 2022-03-04
Not Subject to NDA
T_RSSI_MIN = RSSI_Avg*(1-
(<P_RSSI_T4G>/100))
where RSSI_Avg is the average of
the last 50 RSSI measures.
Value:
0÷100
:
RSSI threshold values
<P_RSRQ_T4G>
integer
20
Set the threshold of RSRQ. The
threshold (RSRQ_Thr) is calculated
as
RSRQ_Thr = RSRQ_Avg*(1-
(<P_RSRQ_T4G>/100))
where RSRQ_Avg is the average of
the last 50 RSRQ measures.
Value:
0÷100
:
RSRQ threshold values
<unused>
integer
0
unused parameter
Value:
0
:
dummy value
<urcDump>
integer
0
enable/disable URC dump
Values:
0
:
disable URC dump
1
:
enable URC dump and save the jamming
condition in a file
Additional info:
<mode>=1