Telit Wireless Solutions LE910C series - Page 376

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 376 of 1904 2022-03-04
Not Subject to NDA
1: voice(telephony)
2: data
4: fax (facsimile services)
8: short message service
16: data circuit sync
32: data circuit async
64: dedicated packet access
128: dedicated PAD access
Value:
1÷255
:
1..255
Additional info:
When <mode>=2 and command is successful:
+CLCK: <status>[,<class1>[<CR><LF>
+CLCK: <status>,<class2>[...]]
Name
Type
Default
Description
<status>
integer
N/A
the status of the facility
Values:
0
:
not active
1
:
active
AT+CLCK=?
Test command reports all the facilities supported by the device.