Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 386 of 1904 2022-03-04
Not Subject to NDA
Read command gives the status of <n>, and also triggers an interrogation
of the provision status of the COLP service according 3GPP TS 22.081
(given in <m>) in the format:
+COLP: <n>,<m>
Additional info:
where
Name
Type
Default
Description
<n>
integer
N/A
COL presentation enabled/disabled
Values:
0
:
COL presentation disabled
1
:
COL presentation enabled
<m>
integer
N/A
status of the COLP service
Values:
0
:
COLP not provisioned
1
:
COLP provisioned
2
:
unknown (e.g. no network is present)
This command issues a status request to the network, hence it
may take a few seconds to give the answer due to the time needed
to exchange data with it.
AT+COLP=?
Test command returns the range for the parameter <n>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English