Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 392 of 1904 2022-03-04
Not Subject to NDA
<str>
string
-
USSD-string (when <str> parameter is not
given, network is not interrogated)
13. If <dcs> indicates that 3GPP TS 23.038
default alphabet is used ME/TA
converts GSM alphabet into current TE
character set (see +CSCS).
14. If <dcs> indicates that 8-bit data coding
scheme is used: ME/TA converts each
8-bit octet into two IRA character long
hexadecimal number; e.g. octet with
integer value 42 is presented to TE as
two characters 2A (IRA 50 and 65).
<dcs>
integer
-
3GPP TS 23.038 Cell Broadcast Data Coding
Scheme in integer format (default is 0).
Unsolicited field:
Name
Type
Description
<m>
integer
Status service value
Values:
0
:
no further user action required (network
initiated USSD-Notify, or no further
information needed after mobile initiated
operation)
1
:
further user action required (network initiated
USSD-Request, or further information needed
after mobile initiated operation)
2
:
USSD terminated by the network
3
:
other local client has responded
4
:
operation not supported
5
:
network time out

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English