Telit Wireless Solutions LE910C series - Page 395

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 395 of 1904 2022-03-04
Not Subject to NDA
where:
<ccm> - current call meter in home units, string type: three bytes of
the CCM value in hexadecimal format (e.g. "00001E" indicates
decimal value 30)
Unsolicited field:
Name
Type
Description
<ccm>
hex
The unsolicited result code enabled by parameter
<mode> is in the format:
+CCCM: <ccm>
where:
<ccm> - current call meter in home units, string type:
three bytes of the CCM value in hexadecimal format
(e.g. "00001E" indicates decimal value 30)
The unsolicited result code +CCCM is sent when the CCM value
changes, but not more than every 10 seconds.
AT+CAOC?
Read command reports the value of parameter <mode> in the format:
+CAOC: <mode>
AT+CAOC=?
Test command reports the supported values for <mode> parameter.