Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 407 of 1904 2022-03-04
Not Subject to NDA
if <index> given but <oper> left out, the entry deleted. If <oper>
given but <index> left out, <oper> put in the next free location. If
only <format> given, the format of the <oper> in the read command
changes. Currently <GSM_Compact_AcT> not supported but set
value is acceptable.
AT+CPOL?
Read command returns all used entries from the UICC list of preferred
operators.
AT+CPOL=?
Test command returns the <index> range supported by the UICC and the
range for the <format> parameter.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English