Telit Wireless Solutions LE910C series - Page 414

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 414 of 1904 2022-03-04
Not Subject to NDA
The command refers to codec information in speech call, and to
channel mode in data/fax call.
If AT#CODEC=0, the reported channels codecs set, for <format>=0,
is 255 (all codecs).
AT#CODECINFO?
Read command reports <format> and <mode> parameter values in the
format:
#CODECINFO: <format>,<mode>
AT#CODECINFO=?
Test command returns the range of supported <format> and <mode>
parameters values.