Telit Wireless Solutions LE910C series - Page 422

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 422 of 1904 2022-03-04
Not Subject to NDA
1
:
-5...-2 dBm
2
:
-8...-6 dBm
3
:
-11...-9 dBm
4
:
-15...-12 dBm
5
:
-18...-16 dBm
6
:
-22...-19 dBm
7
:
-24...-23 dBm
99
:
not known or not detectable
NOTE: this command should be used instead of the %Q and %L
commands, since GSM/WCDMA relevant parameters are the
radio link ones and no line is present, hence %Q and %L have no
meaning
AT+CSQ=?
Test command returns the supported range of values of the parameters
<rssi> and <ber>.
Although +CSQ is an execution command without parameters,
3GPP TS 27.007 requires the Test command to be defined.