Telit Wireless Solutions LE910C series - Page 444

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 444 of 1904 2022-03-04
Not Subject to NDA
AT#BND=?
Test command returns the supported range of values of parameters
In case module does not support TDS-CDMA
<band>, <UMTS_band> and <LTE_band>
In case module supports TDS-CDMA
<band>, <UMTS_band>,<LTE_band>, and <TDSCDMA_band>
Set command
AT#BND=5,15,800C5
OK
AT#BND=5,,800C5
OK
Test command
AT#BND=?
#BND: (0-5),(0,5,6,13,15),(800C5)
OK
Read command
AT#BND?
#BND: 5,15,800C5
OK
Read command shows that the supported LTE bands are: B1, B3, B7, B8,
and B20