LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 499 of 1904 2022-03-04
Reference Signal Received
Quality
E-UTRA Assigned Radio
Channel
minimum required RX level
in the cell
TA: <timadv> reported only for the serving cell.
When AT#MONI=7 is the last setting entered, the execution
command AT#MONI<CR> reports the information previously listed
for each of the cells in the neighbor of the serving cell. The
information is formatting in a sequence of <CR><LF>-terminated
strings.
The timing advance value is meaningful only during calls or GPRS
transfers active.
AT#MONI=?
Test command reports the maximum number of cells, in a neighbor of the
serving cell excluding it, from which we can extract GSM/LTE related
information, along with the ordinal number of the current selected cell, in
the format:
#MONI: (<MaxCellNo>,<CellSet>)
Additional info:
To Next Page
Loading...
Need help?
General
