Telit Wireless Solutions LE910C series - Page 516

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 516 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Description
<number>
string
phone number of format specified by <type>
<type>
string
type of address octet in integer format (refer 3GPP
TS 24.008 subclause 10.5.4.7)
<subaddr>
string
string type subaddress of format specified by
<satype>
<satype>
string
type of subaddress octet in integer format (refer
3GPP TS 24.008 subclause 10.5.4.8)
AT+CDIP?
Read command gives the status of <n> and also triggers an interrogation
of the provision status of the "multiple called numbers" service.
+CDIP: <n>,<m>
Additional info:
where
Name
Type
Default
Description
<n>
integer
N/A
parameter sets/shows the result code
presentation status to the TE
Values:
0
:
disable
1
:
enable
<m>
integer
0
parameter shows the subscriber
"multiple called numbers" service
status in the network
Values: