Telit Wireless Solutions LE910C series - Page 525

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 525 of 1904 2022-03-04
Not Subject to NDA
1÷30
:
automatically rounded to a multiple of 5 seconds
Additional info:
when <cmd>=2 and command successful, it returns:
+CCFC: <status>,<class
1
>[,<number>,<type>[,,,<time>]][<CR><LF>
+CCFC: <status>,<class
2
>[,<number>,<type>[,,,<time>]][ ... ]]
Name
Type
Default
Description
<status>
integer
0
status of the network service
Values:
0
:
not active
1
:
active
<time>
string
-
it is returned only when <reason>=2
("no reply") and <cmd>=2.
When querying the status of a network service (<cmd>=2) the
response line for 'not active' case (<status>=0) should be returned
only if service is not active for any <class>.
AT+CCFC=?
Test command reports supported values for the parameter <reason>.