Telit Wireless Solutions LE910C series - Page 626

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 626 of 1904 2022-03-04
Not Subject to NDA
<stat>
integer
N/A
status value
Values:
0
:
new message
1
:
read message
2
:
stored message not sent yet
3
:
stored message already sent
4
:
all messages
In case of PDU mode the representation format (see +CMGF) is:
+CMGL: <index>,<stat>,<alpha>,<length><CR><LF><pdu>[<CR><LF>
+CMGL: <index>,<stat>,<alpha>,<length><CR><LF><pdu>[...]]
Name
Type
Default
Description
<index>
integer
-
message position in the storage list.
<stat>
integer
-
message status. See the above <stat>
parameter description.
<alpha>
string
-
String type alphanumeric representation
of <da> or <oa>, corresponding to an
entry found in the phonebook; used
character set is the one selected with
command +CSCS.
<length>
integer
-
PDU length in bytes
<pdu>
string
-
message in PDU format, according to
3GPP TS 23.040
When message format is TEXT mode, the <stat> parameter is: