Telit Wireless Solutions LE910C series - Page 644

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 644 of 1904 2022-03-04
Not Subject to NDA
- if current <dcs> (see +CSMP) indicates that 8-bit or UCS2 data
coding scheme is used or current <fo> (see +CSMP) indicates
that 3GPP TS 23.040 TP-User-Data-Header-Indication is set,
the entered text should consist of two IRA character long
hexadecimal numbers which ME/TA converts into 8-bit octet
(e.g. the 'asterisk' will be entered as 2A (IRA50 and IRA65) and
this will be converted to an octet with integer value 0x2A)
To send the message issue Ctrl-Z char (0x1A hex). To exit without
sending the message issue ESC char (0x1B hex).
Name
Type
Default
Description
<da>
string
-
destination address, string type
represented in the currently selected
character set (see +CSCS).
<toda>
string
129
type of destination address
For Verizon FW, the range of <toda> is
0 - 255.
Values:
129
:
number in national format
145
:
number in international format (contains the
"+")
Unsolicited fields:
Name
Type
Description
<mr>
integer
TP-Message-Reference number as per 3GPP TS
23.040
<scts>
string
TP-Service Centre Time Stamp in Time String
Format.
<scts> is returned when +CSMS <service> value is 1
and network supports.