Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 651 of 1904 2022-03-04
Not Subject to NDA
<mn>
integer
-
TP-Message-Number in integer
format.
<da>
string
-
TP-Destination-Address-Value field
in string format represented in the
currently selected character set
(see +CSCS).
<toda>
integer
129
TP-Destination-Address Type-of-
Address octet:
Values:
129
:
number in national format
145
:
number in international format (contains the
"+")
Unsolicited fields:
Name
Type
Description
<mr>
integer
TP-Message-Reference in integer format
<ackpdu>
string
RP-User-Data element of RP-ACK PDU (When
+CSMS <service> value is 1 and network
supports).
<scts>
string
TP-Service Centre Time Stamp in Time String
Format. (When +CSMS <service> value is 1 and
network supports).
The DCD signal shall be in ON state while data is entered. The
echoing of data is controlled by echo command E.
In PDU mode: when the length of the SMSC address equals 0,
then the SMSC address set with command +CSCA is used; in this
case the SMSC Type of Address octet shall not be present in the
data.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English