Telit Wireless Solutions LE910C series - Page 705

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 705 of 1904 2022-03-04
Not Subject to NDA
<curr> - the current source of time as displayed by +cclk command.
Values are:
0 - INVALID. Time wasn't yet updated through NITZ, GNSS or Manual.
1 - NITZ source.
2 - GNSS source.
3 - Manual source.
AT#CLKSRC=?
Test command reports the supported range of values for parameter <src>.
The setting is saved automatically in NVM.
Setting time manually is possible to all values of <src>, but in values
of '0', '1', '2' and '3' time shall be override when NITZ or GNSS
arrives according to the rule that is defined to that value.