Telit Wireless Solutions LE910C series - Page 829

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 829 of 1904 2022-03-04
Not Subject to NDA
<bfr>
integer
0
controls the effect on
buffered codes when <mode>
1 or 2 is entered.
Values:
0
:
TA buffer of unsolicited result codes defined within
this command is cleared when <mode> 1 or 2 is
entered.
1
:
TA buffer of unsolicited result codes defined within
this command is flushed to the TE when <mode> 1 or 2
is entered (OK response shall be given before flushing
the codes)
Additional info:
A network request for PDP context activation occurred when the TA
was unable to report it to the TE with a +CRING unsolicited result
code and was automatically rejected.
+CGEV: REJECT <PDP_type>, <PDP_addr>
The network has requested a context reactivation. The <cid> that
was used to reactivate the context is provided if known to TA.
+CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]
The network has forced a context deactivation. The <cid> that was
used to activate the context is provided if known to TA.
+CGEV: NW_DEACT <PDP_type>, <PDP_addr>, [<cid>]