Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 857 of 1904 2022-03-04
Not Subject to NDA
2
:
UTRAN
7
:
E-UTRAN
<rac>
string
routing area code (one byte) in hexadecimal format
Routing Area Code when <AcT>=0 or 2
Mobile Management Entity code when <AcT>=7
<lac>, <ci>, <AcT>, and <rac> network information is reported by
URC only if <mode>=2, and the module is registered on some
network cell.
<lac> and <rac> values will change <tac> and <mme_code> values
in LTE.
AT+CGREG?
Read command returns the current value of <mode>, the registration
status <stat>, and the network information (<lac>, <ci>, <AcT>, and <rac> )
according to the used <mode> parameter value.
+CGREG: <mode>,<stat>[,<lac>,<ci>[,<AcT>,<rac>]]
<lac>, <ci>, <AcT>, and <rac> network information is reported only if
<mode>=2 or 4 and the module is registered on some network cell.
<lac> and<rac> values will change <tac> and <mme_code> values in LTE.
AT+CGREG=?
Test command returns supported values for parameter <mode>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English