Telit Wireless Solutions LE910C series - Page 883

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 883 of 1904 2022-03-04
Not Subject to NDA
applications on the smart card using a
logical channel other than the default
channel (channel "0").
<length>
integer
-
length of the characters that are sent
to TE in <command> (two times the
actual length of the command)
<command>
string
-
command passed on by the MT to the
UICC in the format as described in
3GPP TS 31.101 (hexadecimal
character format; refer +CSCS).
Additional info:
List of the meaning of the response messages parameters.
Name
Type
Default
Description
<length>
integer
-
length of the characters that are
sent to TE in the <response> (two
times the actual length of the
response)
<response>
string
-
response to the command passed
on by the UICC to the MT in the
format as described in 3GPP TS
31.101 (hexadecimal character
format; refer +CSCS).
<err>
string
-
error values (numeric format
followed by verbose format)
AT+CGLA=?
Test command returns the OK result code.