Telit Wireless Solutions LE910C series - Page 904

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 904 of 1904 2022-03-04
Not Subject to NDA
3
:
profile 3
4
:
profile 4
5
:
profile 5
6
:
profile 6
7
:
profile 7
8
:
profile 8
<enable_profile>
integer
N/A
Profile enable or not
Values:
0
:
disable the profile
1
:
enable the profile
Additional info:
If you want queries the profile, only two parameters <mode> and
<slot> are needed. The return value is as follow.
Response about queries the profile:
#ESIMPF: <profile_id>,<profile_type>
Name
Type
Default
Description
<profile_type>
integer
N/A
Profile type information
Values:
0
:
Profile type regular
1
:
Profile type emergency
If you want deletes the profile, only three parameters <mode>,
<slot> and <profile_id> are needed. The return value is OK or
ERROR.