Telit Wireless Solutions LE910C series - Page 92

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 92 of 1904 2022-03-04
Not Subject to NDA
0x1
:
Mode 0 (4.75kbps)
0x2
:
Mode 1 (5.15kbps)
0x4
:
Mode 2 (5.9kbps)
0x8
:
Mode 3 (6.17kbps)
0x10
:
Mode 4 (7.4kbps)
0x20
:
Mode 5 (7.95kbps)
0x40
:
Mode 6 (10.2kbps)
0x80
:
Mode 7 (12.2kbps)
0x100
:
Mode 8 (12.2kbps)
<amr_wb_en>
integer
1
High definition voice; it enables AMR-
Wideband
Values:
0
:
Disable
1
:
Enable (Default)
The values are stored in the NV's file system.
<amr_wb> - NV 67239
<amr_nb> - NV 66031
<amr_wb_en> - NV 65964
The related NV items are for legacy model or old version only. So
the default value is set by "0,0,1" when NVs are not configured or
when there is no meaning.
AT#CODECIMS?
Read command returns the current IMS CODEC configuration mode in the
format: