Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 968 of 1904 2022-03-04
Not Subject to NDA
- The command works only for Analog mode (#DVI = 0)
- The audio path is mutually exclusive, enabling one disables the
other.
- When changing the audio path, the volume level is set at the
previously stored value for that audio path (see +CLVL).
AT#CAP?
Read command reports the set value of the parameter <n> in the format:
#CAP: <n>
AT#CAP=?
Test command reports the supported values for the parameter <n>.
The setting is saved in NVM using the &W command.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English