Telit Wireless Solutions LE910C series - Page 1156

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1156 of 1904 2022-03-04
Not Subject to NDA
<mod>=3
The command starts instantaneously the main antenna detection as in
<mod>=2, but the command does not return the control until the detection
algorithm ended. The returned value is the antenna status just detected.
The returned value is the antenna <presence> status just detected and it
format is:
#GSMAD: <antenna>,<presence>
OK
The instantaneous activation does not affect a periodic activation eventually
started before.
Unsolicited fields:
Name
Type
Description
<antenna>
integer
antenna
Values:
1
:
Main (default)
2
:
DIV
3
:
GPS
<presence>
integer
returns information on the antenna status.
Values:
0
:
antenna connected
1
:
antenna connector short circuited to ground
2
:
antenna connector short circuited to power
3
:
antenna not detected (open circuit)