Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1200 of 1904 2022-03-04
Not Subject to NDA
In case of USER Settings. if user doesn't set target value, then void string will
be displayed.
if current netmask is "255.255.255.0", and you set only "USER IP" address
without setting "USER NETMASK", then netmask will
become "255.255.255.0", and will be used in #ECM as well.
AT#ECMC=?
Test command returns the range of supported values for all the parameters.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English