Telit Wireless Solutions LE910C series - Page 1232

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1232 of 1904 2022-03-04
Not Subject to NDA
0
:
Text mode
1
:
Hexadecimal mode
<keepalive>
integer
0
Set the TCP Keepalive value in
minutes
Values:
0
:
deactivated
1÷240
:
keepalive time in minutes
<ListenAutoRsp>
integer
0
set the listen auto-response
mode, that affects the
commands #SL and #SLUDP
Values:
0
:
deactivated
1
:
activated
<sendDataMode>
integer
0
Data mode for sending data in
command mode (#SSEND)
Values:
0
:
data represented as text
1
:
0ata represented as sequence of
hexadecimal numbers (from 00 to FF). Each
octet of the data is given as two IRA
character long.
Additional info:
These are the SRING formats, depending on <srMode> setting:
if <srMode> = 0 (Normal):
SRING: <connId>