Telit Wireless Solutions LE910C series - Page 1234

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1234 of 1904 2022-03-04
Not Subject to NDA
#SCFGEXT: <connId
1
>,
<srMode>,<dataMode>,<keepalive>,<ListenAutoRsp>,0<CR><LF>
. . .
#SCFGEXT:<connId
conMax
>,<srMode>,<dataMode>,<keepalive>,
<ListenAutoRsp>,0<CR><LF>
AT#SCFGEXT=?
Test command returns the range of supported values for all the sub parameters.
•
Socket 1 set with data view sring, text data mode, a keepalive time of
30 minutes and listen auto-response set.
Socket 3 set with data amount sring, hex recv data mode, no
keepalive and listen auto-response not set.
Socket 4 set with hex recv and send data mode.
AT#SCFGEXT?
#SCFGEXT: 1,2,0,30,1,0
#SCFGEXT: 2,0,0,0,0,0
#SCFGEXT: 3,1,1,0,0,0
#SCFGEXT: 4,0,1,0,0,1
...
...
OK