Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1238 of 1904 2022-03-04
Not Subject to NDA
In the case of command mode connection and remote closure with
subsequent inactivity timeout closure without retrieval of all available data
(#SRECV or SRING mode 2), it is indicated cause 1 for both possible FIN
and RST from remote.
AT#SCFGEXT2?
Read command returns the current socket extended configuration of the six
sockets. The format is:
#SCFGEXT2:<connId
1
>,<bufferStart
1
>,<abortConnAttempt
1
>,0,0,<noCarrierMode
1
>
<CR><LF>
. . .
#SCFGEXT2:<connId
conMax
>,<bufferStar
conMax
>,<abortConnAttempt
conMax
>0,0,<noCa
rrierMode
conMax
><CR><LF>
AT#SCFGEXT2=?
Test command returns the range of supported values for all parameters.
•
Set the new transmission timer behavior for <connId>=1 and
<connId>=2 sockets.
AT#SCFGEXT2=1,1
OK
AT#SCFGEXT2=2,1
OK
Change the <txTo> data sending timeout of the <connId>=1 socket.
AT#SCFG=1,1,300,90,600,30
OK

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English