Telit Wireless Solutions LE910C series - Page 1312

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1312 of 1904 2022-03-04
Not Subject to NDA
after SRING that indicates incoming UDP data and issuing #SRECV
to receive data itself, through #SS is possible to check last remote
host (IP/Port).
if successive resume of the socket to online mode Is performed
(#SO), connection with first remote host is restored as it was
before.
the maximum number of bytes to send is 1500
AT#SSENDUDP=?
Test command reports the supported range of values for parameters
<connId>, <remoteIP> and <remotePort>.