Telit Wireless Solutions LE910C series - Page 1313

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1313 of 1904 2022-03-04
Not Subject to NDA
•
Starts listening on <LocPort> (previous setting of firewall through
#FRWL has to be done)
AT#SLUDP=1,1, <LocPort>
OK
SRING: 1 // UDP data from a remote host available
AT#SA=1,1
OK
SRING: 1
AT#SI=1
#SI: 1,0,0,23,0 // 23 bytes to read
OK
AT#SRECV=1,23
#SRECV:1,23
message from first host
OK
AT#SS=1
#SS: 1,2,<LocIP>,<LocPort>,<RemIP1>,<RemPort1>
OK
AT#SSENDUDP=1,<RemIP1>,<RemPort1>
>response to first host