Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1466 of 1904 2022-03-04
Not Subject to NDA
received system
information.
CELL_LOW_LEVEL
:
the cell <rxLev> is
low.
CELL_OTHER
:
none of the above
(e.g. exclusion
timer running, no
BCCH available,
etc.).
<numArfcn>
integer
-
number of valid channels in
the Cell Channel Description.
<arfcnn>
integer
-
arfcn of a valid channel in
the Cell Channel Description
( n is in the range
1..<numArfcn>)
<numChannels>
integer
-
decimal number; it is the
number of valid channels in
the BCCH Allocation list; the
output of this information for
non-serving cells depends
on last #CSURVEXT setting:
If #CSURVEXT=0 this
information is displayed only
for serving cell.
If #CSURVEXT=1 or 2 this
information is displayed also
for every valid scanned
BCCH carrier.
If #CSURVEXT=3 this
information is displayed
more information like tx
power, reselection offset,
t3212 timer and so on.
<ban>
integer
-
decimal number; it is the
arfcn of a valid channel in

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English