Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1467 of 1904 2022-03-04
Not Subject to NDA
the BA list ( n is in the range
1..<numChannels>); the
output of this information for
non-serving cells depends
on last #CSURVEXT setting:
If #CSURVEXT=0 this
information is displayed only
for serving cell.
If #CSURVEXT=1 or 2 this
information is displayed also
for every valid scanned
BCCH carrier.
If #CSURVEXT=3 this
information is displayed
more information like tx
power, reselection offset,
t3212 timer and so on.
(The following informations
will be printed only if GPRS
is supported in the cell)
<pbcch>
integer
N/A
packet broadcast control
channel.
Values:
0
:
pbcch not activated on the cell
1
:
pbcch activated on the cell
<nom>
integer
-
network operation mode
<rac>
integer
-
routing area code
<spgc>
integer
N/A
SPLIT_PG_CYCLE support.
Values:
0
:
SPLIT_PG_CYCLE is not supported on
CCCH on this cell

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English