Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1483 of 1904 2022-03-04
Not Subject to NDA
<s>
integer
-
starting channel
<e>
integer
-
ending channel
Additional info:
2G Network survey information text lines:
(For BCCH-Carrier)
arfcn: <arfcn> bsic: <bsic> rxLev: <rxLev> ber: <ber> mcc: <mcc> mnc: <mnc>
lac: <lac> cellId: <cellId> cellStatus: <cellStatus> numArfcn: <numArfcn> arfcn:
[<arfcn1> ..[ <arfcn64>]] [numChannels: <numChannels> array: [<ba1>
..[<ba32>]] [pbcch: <pbcch> [nom: <nom> rac: <rac> spgc: <spgc> pat: <pat>
nco: <nco> t3168: <t3168> t3192: <t3192> drxmax: <drxmax> ctrlAck: <ctrlAck>
bsCVmax: <bsCVmax> alpha: <alpha> pcMeasCh: <pcMeasCh>]]]
<CR><LF><CR><LF><CR><LF>
(For non BCCH-Carrier)
arfcn: <arfcn> rxLev: <rxLev>
Name
Type
Default
Description
<arfcn>
integer
-
C0 carrier assigned radio channel (BCCH
- Broadcast Control Channel).
<bsic>
integer
-
base station identification code; if
#CSURVF last setting is 0, <bsic> is a
decimal number, else it is a 2-digits octal
number.
<rxLev>
integer
-
decimal number; it is the receiption level
(in dBm).
<ber>
integer
-
decimal number; it is the bit error rate
(in %).
<mcc>
hex
-
hexadecimal 3-digits number; it is the
mobile country code.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English