Telit Wireless Solutions LE910C series - Page 1484

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1484 of 1904 2022-03-04
Not Subject to NDA
<mnc>
hex
-
hexadecimal 2-digits/3-digits number; it
is the mobile network code.
<lac>
mixed
-
location area code; if #CSURVF last
setting is 0, <lac> is a decimal number,
else it is a 4-digits hexadecimal number.
<cellId>
mixed
-
cell identifier; if #CSURVF last setting is
0, <cellId> is a decimal number, else it is
a 4-digits hexadecimal number
<cellStat>
string
N/A
string type; it is the cell status
Values:
0
:
the cell is a suitable cell (CELL_SUITABLE).
1
:
the cell is low priority based on the received system
information (CELL_LOW_PRIORITY).
2
:
the cell is forbidden (CELL_FORBIDDEN).
3
:
the cell is barred based on the received system
information (CELL_BARRED).
4
:
the cell <rxLev> is low (CELL_LOW_LEVEL).
5
:
none of the above (e.g. exclusion timer running, no
BCCH available, etc.) (CELL_OTHER).
<numArfcn>
integer
-
number of valid channels in the Cell
Channel Description.
<arfcnn>
integer
-
arfcn of a valid channel in the Cell
Channel Description ( n is in the range
1..<numArfcn>)
<numChannels>
integer
-
decimal number; it is the number of valid
channels in the BCCH Allocation list; the
output of this information for non-
serving cells depends on last
#CSURVEXT setting: