Telit Wireless Solutions LE910C series - Page 1503

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1503 of 1904 2022-03-04
Not Subject to NDA
<s>
integer
-
starting channel
<e>
integer
-
ending channel
Additional info:
Currently work only if module camped on LTE cell.
For serving cell or other carrier cells:
earfcn: <earfcn> rxLev: <rxLev> mcc: <mcc> mnc: <mnc> cellId:
<cellId> tac: <tac> phyCellId: <pci> cellStatus: <cellStatus> rsrp:
<rsrp> rsrq: <rsrq> bw: <bandwidth>
For neighbor cell:
earfcn: <earfcn> rxLev: <rxLev> phyCellId: <pci> cellStatus:
<cellStatus> rsrp: <rsrp> rsrq: <rsrq>
Name
Type
Default
Description
<earfcn>
integer
-
E-UTRA Assigned Radio Channel
<rxLev>
integer
-
decimal number; it is the
reception level (in dBm)
<mcc>
hex
-
hexadecimal 3-digits number; it
is the mobile country code
<mnc>
hex
-
hexadecimal 2/3 digits number;
it is the mobile network code
<cellId>
mixed
-
cell identifier; if #CSURVF last
setting is 0, <cellId> is a decimal
number, else it is a 8-digits
hexadecimal number
<tac>
mixed
-
Tracking Area Code. if #CSURVF
last setting is 0, <tac> is a
decimal number, else it is a 4-
digits hexadecimal number
<pci>
mixed
-
physical cell identifier; if
#CSURVF last setting is 0, <pci>