Telit Wireless Solutions LE910C series - Page 1504

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1504 of 1904 2022-03-04
Not Subject to NDA
is a decimal number, else it is a
4-digits hexadecimal number
<cellStatus>
string
N/A
it is the cell status
Values:
CELL_SUITABLE
:
C0 is a suitable cell
CELL_LOW_PRIORITY
:
the cell is low priority
based on the received
system information
CELL_FORBIDDEN
:
the cell is forbidden
CELL_BARRED
:
the cell is barred
based on the received
system information
CELL_LOW_LEVEL
:
the cell <rxLev> is low
CELL_OTHER
:
none of the above e.g.
exclusion timer
running, no BCCH
available…etc
<rsrp>
integer
-
Reference Signal Received
Power
<rsrq>
integer
-
Reference Signal Received
Quality
<bandwidth>
integer
-
E-UTRA bandwidth of serving
cell
The value of <bandwidth> for LTE neighbor cells(intra/inter) of
same PLMN cannot be appeared.
The CELL_LOW_PRIORITY of <cellStatus> for LTE is not supported.
The command is executed within max 3 minutes.