Telit Wireless Solutions LE910C series - Page 1520

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1520 of 1904 2022-03-04
Not Subject to NDA
<cellId>
mixed
-
cell identifier; if #CSURVF last setting is
0, <cellId> is a decimal number, else it is
a 4-digits hexadecimal number
<cellStatus>
integer
0
decimal number; it is the cell status
Values:
0
:
the cell is a suitable cell (CELL_SUITABLE)
1
:
the cell is low priority based on the received system
information (CELL_LOW_PRIORITY)
2
:
the cell is forbidden (CELL_FORBIDDEN)
3
:
the cell is barred based on the received system
information (CELL_BARRED)
4
:
the cell <rxLev> is low (CELL_LOW_LEVEL)
5
:
none of the above (e.g. exclusion timer running, no
BCCH available, etc.) (CELL_OTHER)
<numArfcn>
integer
-
number of valid channels in the Cell
Channel Description
<arfcnn>
integer
-
arfcn of a valid channel in the Cell
Channel Description ( n is in the range
1..<numArfcn>)
<numChannels>
integer
-
decimal number; it is the number of valid
channels in the BCCH Allocation list; the
output of this information for non-serving
cells depends on last #CSURVEXT
setting:
If #CSURVEXT=0 this information is
displayed only for serving cell.
If #CSURVEXT=1 or 2 this information is
displayed also for every valid scanned
BCCH carrier.
If #CSURVEXT=3 this information is
displayed more information like tx