Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1521 of 1904 2022-03-04
Not Subject to NDA
power, reselection offset, t3212 timer
and so on.
<ban>
integer
-
decimal number; it is the arfcn of a valid
channel in the BA list ( n is in the range
1..<numChannels>); the output of this
information for non-serving cells
depends on last #CSURVEXT setting:
If #CSURVEXT=0 this information is
displayed only for serving cell.
If #CSURVEXT=1 or 2 this information is
displayed also for every valid scanned
BCCH carrier.
If #CSURVEXT=3 this information is
displayed more information like tx
power, reselection offset, t3212 timer
and so on.
(The following informations will be
printed only if GPRS is supported in the
cell)
<pbcch>
integer
N/A
packet broadcast control channel
Values:
0
:
pbcch not activated on the cell
1
:
pbcch activated on the cell
<nom>
integer
-
network operation mode
<rac>
integer
-
routing area code
<spgc>
integer
N/A
SPLIT_PG_CYCLE support
Values:
0
:
SPLIT_PG_CYCLE is not supported on CCCH on this
cell
1
:
SPLIT_PG_CYCLE is supported on CCCH on this cell

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English