Telit Wireless Solutions LE910C series - Page 1562

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1562 of 1904 2022-03-04
Not Subject to NDA
AT#EVMONI?
Read command returns the current settings for each event in the format:
#EVMONI: <label>,<mode>,<param0>[,<param1>[,<param2>[,<param3>]]]
where <param0>, <param1>, <param2> and <param3> assume the
meaning according to the <paramType> and <label> values used in the set
command.
AT#EVMONI=?
Test command returns values supported as a compound value.