Telit Wireless Solutions LE910C series - Page 1567

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1567 of 1904 2022-03-04
Not Subject to NDA
1
:
auto-reconnect lazy - reconnect on next
send and every 3600 seconds.
2
:
auto-reconnect moderate - reconnect 120
seconds, then every 3600 seconds after
the first day.
3
:
auto-reconnect aggressive - reconnect
every 120 seconds.
<overflowHandling>
integer
0
Flag indicating if the way to
handle overflows in data
management.
Values:
0
:
FIFO
1
:
LIFO
<atrunInstanceId>
integer
2
AT instance used by the service
to run the AT Command.
Value:
0÷4
:
AT instance that will be used by the
service to run the AT Command(This
param is not in use just for backward
capability)
<serviceTimeout>
integer
5
It defines in seconds the
maximum time interval for a
service request to the server.
Value:
1÷120
:
time interval in seconds
<contextID>
integer
-
PDP context identifier (see
+CGDCONT command)
<unused_1>
integer
-
parameter for future use. Must
be set to 0