* AT#M2MRUN=5,"app2.bin"
immediate stop of all apps in running, and in place start of
app2.bin, if not already in running, after its own current immediate
delay
* AT#M2MRUN=5,"app2.bin",0
immediate stop of all apps in running, and immediate start of
app2.bin with no delay, if not already in running
* AT#M2MRUN=5,"app2.bin",10
immediate stop of all apps in running, and in place load of
app2.bin, if not already in running, after 10s delay
Depending on selected two different delays have effects.
1. Boot mode: in this mode both "boot" and "immediate" delays are
affected:
if <delay> not provided:
delays are not changed from their previous configured values.
Default values are 0.
if <delay> provided:
delays are set accordingly
2. Immediate mode: in this mode only "immediate" delay is set:
if <delay> not provided:
"immediate" delay is not changed from its previous configured
value.
if <delay> provided:
"Immediate" delay is set accordingly.
See special case for =5 in additional info.
To Next Page
Loading...
Need help?
General
