Telit Wireless Solutions LE910C series - Page 1637

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1637 of 1904 2022-03-04
Not Subject to NDA
Parameters setting provided <mode> with in boot mode range is
saved on "/mod/appcfg.ini" file
Executables are binary files with ".bin" extension saved in "/mod"
directory which RUN permission has been set by
#M2MRUN command.
The integrity check is performed internally.
AT#M2MRUN?
Read command reports the executables properties. The report has the
following format
#M2MRUN: <app1.bin,run1,delay1,state1,va1,ram1>
#M2MRUN: <app2,bin,run2,delay2,state2,va2,ram2>
...
#M2MRUN: <appN,bin,runN,delayN,stateN,vaN,ramN>
Additional info:
Here are the parameters meanings.
Name
Type
Default
Description
<appN.bin>
string
-
executable name
<runN>
integer
N/A
executable run boot property
Values:
0
:
do not start after reboot
1
:
auto start after reboot
<delayN>
integer
-
executable boot delay
<stateN>
integer
0
executable run state