Telit Wireless Solutions LE910C series - Page 1826

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1826 of 1904 2022-03-04
Not Subject to NDA
Values:
0
:
disable dying gasp.
1
:
set the command parameters.
2
:
read dying gasp statistics.
<GPIO>
intege
r
-
GPIO pin number; supported range is from 1
to a value that depends on the hardware.
(see "Hardware User's Guide")
<trigger>
intege
r
0
GPIO trigger used for event
Values:
0
:
activate dying gasp when GPIO translates from high to
low
1
:
activate dying gasp when GPIO translates from low to
high
<action>
intege
r
N/A
Dying GASP Action
Values:
0
:
disable both SMS and IP (TCP or UDP) connection
1
:
Send SMS
2
:
use IP (TCP or UDP) connection
3
:
use SMS and IP (TCP or UDP) connection
<URC>
intege
r
N/A
URC presentation mode.
The unsolicited message is in the format:
#DGEN: <GPIO value>,<text>
If parameter <action> is '0' (disabled):
#DGEN: <GPIO value>
Values: