Telit Wireless Solutions LE910C series - Page 1827

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1827 of 1904 2022-03-04
Not Subject to NDA
0
:
It disables the presentation of the notification URC.
1
:
It enables the presentation of the notification URC
when GPIO interrupt is triggered.
<text>
string
-
The format of the text is determined by
<text_format>.
When the text format is selected, SMS and IP
Content as a string of 8bit ASCII text
characters. Max 160 chars.
When the binary format is selected, every 8-
bit octet of the message must be written as
two IRA character long hexadecimal
numbers, e.g. an octet with integer value
30(I.e. 0x1E) must be written as a string of
two characters "1E" (IRA 49 and 69) it must
enter an uppercase letter.
<text_format>
intege
r
0
Format of the <text> parameter
Values:
0
:
text
1
:
binary
<SMSNum>
intege
r
-
SMS Destination Number as string of 8bit
ASCII Characters. Max 20 chars
<profile_id>
intege
r
N/A
PDP context identifier
Value:
1÷max
:
numeric parameter which specifies a particular
PDP context definition (see +CGDCONT
command); The value of max is returned by the
Test command.
<IP_protocol>
intege
r
N/A
IP protocol used for socket connection