Telit Wireless Solutions LE910C series - Page 226

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 226 of 1904 2022-03-04
Not Subject to NDA
AT#FWSWITCH=?
Test command reports the range of supported values for parameters
<configNum>, <storageNum>, <restore_user_conf>.
Switch to configuration 1-VZW:
AT#FWSWITCH =1
OK
Store current user config - 0 for network config 0 - AT&T, and restore user
config - 1 on new newwork config 1 - VZW on next boot time:
AT#FWSWITCH =1,0,1
OK