Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 334 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Default
Description
<nr>
integer
-
identifies the internal phonebook
position of the module where is
stored the phone number to be dialed
ATD<number><modifier>[;]
If ";" character is present, a voice call is performed overriding the
CLIR supplementary service subscription default value, or
checking the CUG supplementary service information for the
current call according to the modifier.
Name
Type
Default
Description
<number>
integer
-
phone number to be dialed
<modifier>
string
N/A
causes the call overrides the
CLIR supplementary service
subscription default value, or
checks the CUG supplementary
service information
Values:
I
:
invocation, restrict CLI presentation
i
:
suppression, allow CLI presentation
G
:
refer to +CCUG command
g
:
refer to +CCUG command
ATD*<gprs_sc>[*<addr>][*[<L2P>][*[<cid>]]]]#
This command is specific for GPRS functionality, and causes the
MT to perform whatever actions are necessary to establish
communication between the TE and the external PDN.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English