Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 335 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Default
Description
<gprs_sc>
integer
N/A
is the GPRS Service Code, which
identifies a request to use the
GPRS communication
Value:
99
:
GPRS Service Code
<addr>
string
-
identifies the called party in the
address space applicable to the
PDP.
<L2P>
string
-
indicates the layer 2 protocol to
be used (see +CGDATA). For
communications software that
does not support arbitrary
characters in the dial string, the
following numeric equivalents
shall be used: 1 is equivalent to
PPP.
<cid>
integer
-
PDP context definition, see
+CGDCONT command

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English