Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 336 of 1904 2022-03-04
Not Subject to NDA
•
Dial the phone number stored in the SIM phonebook at entry 6. The
call is a data or voice call according to the mode set by +FCLASS
command.
ATD>SM6
OK
•
Dial the phone number stored in the active phonebook at entry 6. The
";" character is used, therefore the call is a voice call.
ATD>6;
OK
•
Dial the phone number corresponding to the alphanumeric field
"Name". The alphanumeric field is searched in all available
memories. The ";" character is used, therefore the call is a voice
call.
ATD>"Name";
OK

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English